BLOG main image
분류 전체보기 (781)
LENOVO (19)
HP (3)
DELL (7)
IBM (32)
My Retain Tip (697)
자료실 (0)
Firmware (5)
기타서버관련소식 (5)
IBM Server Picture (3)
STUDY (2)
설정세팅 (0)
Visitors up to today!
Today hit, Yesterday hit
daisy rss
tistory 티스토리 가입하기!
2014. 7. 26. 06:00
Notice!!
IBM
본 블로그의 모든내용은 ibm.com에 있는 내용이며 본 블로그의 내용은 증빙내용으로는 활용 불가능합니다
주의! 모든 방문자는 공지를 반드시 읽어본 후 글을 읽으시기 바랍니다.:*필독공지*

딴지 거실분들은 절대 읽지 마시고 100% 정확한 정보가 있는 ibm.com 에서 확인하시기 바랍니다.

3.2.1 Install from USB memory key
In this section, we continue the process of using Preboot DSA to install an FoD activation key
that you previously downloaded and placed on a USB memory key. This is useful if you do not
have any network connectivity and have already download the FoD keys you want to apply
onto a USB memory key.
Before you continue, ensure that the FoD keys are located in the following subfolder of the
USB key:
/fodkeys/<FoD UID>/
For example, key file ibm_fod_8003_7160KQ5N05V_anyos_noarch.key should be in folder:
/fodkeys/7160KQ5N05V/
If the keys are not located in this directory, the error shown in Figure 3-16 will display.
Figure 3-16 Files missing from USB memory key
The process to install the FoD keys is as follows (continuing on from step 9 on page 39):
1. If you select Install activation key from removable media, the available removable
media is detected first. Click Next to proceed. See Figure 3-17.
Figure 3-17 Removable media selection
Tip: The folder names are not case sensitive; however, with older versions of Preboot
DSA, the path was case sensitive (for example, “FodKeys”) Also note that the file
extension must be .key (lower case) and not .KEY (upper case).

 

 

/FoDKeys/<FoD UID>/<keyfile.key>

 

반드시 대소문자 구별 UID는 MT SN 임

 

http://www.redbooks.ibm.com/redpapers/pdfs/redp4895.pdf

About
IBM 최신서버에 관련된 경험과 지식을 공유하는 블로그이며 블로그에 처음오신분은 *필독공지*를 꼭 먼저 읽어보시기 바랍니다.