BLOG main image
분류 전체보기 (781)
LENOVO (19)
HP (3)
DELL (7)
IBM (32)
My Retain Tip (697)
자료실 (0)
Firmware (5)
기타서버관련소식 (5)
IBM Server Picture (3)
STUDY (2)
설정세팅 (0)
Visitors up to today!
Today hit, Yesterday hit
daisy rss
tistory 티스토리 가입하기!
2017. 5. 9. 02:27
Notice!!
IBM
본 블로그의 모든내용은 ibm.com에 있는 내용이며 본 블로그의 내용은 증빙내용으로는 활용 불가능합니다
주의! 모든 방문자는 공지를 반드시 읽어본 후 글을 읽으시기 바랍니다.:*필독공지*

딴지 거실분들은 절대 읽지 마시고 100% 정확한 정보가 있는 ibm.com 에서 확인하시기 바랍니다.

Backing up and restoring the management software


Use the IBM Flex System Manager management software to back up or restore
your software image.
On the Backup and Restore page in the management software web interface, you
can initiate a backup of the management software image, schedule future backups
of the management software image, and restore a management software image.

 


Important: The backup file that is created through the management software
backup task is unencrypted, and contains unsecured data that is otherwise
restricted in an IBM Flex System environment. Use your own method to protect
the backup file.


A backup of the management software includes the following data:
v The management software image
v The local IBM Flex System Manager user registry
v IBM Flex System Manager configuration settings (including network settings)
v Discovered endpoints and inventory
v Configuration pattern data


Note: When you initiate a backup, the management software checks for jobs that
are active and in process. If one or more jobs are running when you initiate the
backup, the backup will not proceed.

 

USB백업방법

Before you initiate a management software backup to a USB drive, be aware of the
following conditions:
v The only supported USB file system formats are FAT32, ext3, and ext4.
v If you use the management software web interface to back up the management
software image, the USB drive is mounted automatically as part of the backup
process.
See “Scheduling management software image backups” on page 103 for more
information about scheduling a management software backup.
v Some USB drives might not be recognized when they are first mounted. If you
remove and reinsert the USB drive, it should then be recognized.
v If you back up to a USB device that does not support a minimum write speed of
5 MBps, the management software pauses for several minutes, and the
management node is inoperable.


To back up the management software image to a USB drive with the management
software web interface, complete the following steps:
1. From the Home page, click the Administration tab.
2. On the Administration tab under Serviceability tasks, click Backup and
Restore. The Backup and Restore page opens.
3. From the Backup and Restore page, click Backup Now. The Backup Now
window opens.
4. Select USB device; then, click OK.

Important: Do not power off the IBM Flex System Manager management node
while a backup operation is in process. Otherwise, the backup will fail.

 

 

Note: When you restore an IBM Flex System Manager management software, the
restored IBM Flex System Manager management software will use the firmware
level from the backup.
v In version 1.3.0, you can restore only a backup of version 1.3.0 or version 1.2.1
v With version 1.2.1, you can restore only a backup of version 1.2.1
v With version 1.2.0, you can restore only a backup of version 1.2.0
v With version 1.1.1, you can restore only a backup of version 1.1.1
v With version 1.1.0, you can restore only a backup of version 1.1.0

 

 

https://www.ibm.com/support/knowledgecenter/en/HW94A/com.ibm.director.main.helps.doc/fsm_1_fqr0_bk_systm_mgmt.pdf?view=kc

About
IBM 최신서버에 관련된 경험과 지식을 공유하는 블로그이며 블로그에 처음오신분은 *필독공지*를 꼭 먼저 읽어보시기 바랍니다.