HCL for Oracle Solaris 11 Express, Oracle Solaris OS
오라클 사이트에서 직접 테스트 한 내용입니다
| Type: |
Server System |
| Manufacturer: |
IBM |
| Model: |
System x3550 M3 (7944) |
| Support: |
Solaris Premier Subscription |
| Level: (What's this?) |
Certified |
| Runs on Solaris Versions: |
Solaris 10 10/09 to Solaris 10 09/10
Oracle Solaris 11 Express 2010.11 |
| CPU Type: |
Intel Xeon CPU X5680@3.33GHz |
| Num CPUs: |
2 |
| Num Cores (per CPU): |
6 |
| Chipset: |
Intel 5520 |
| 64-bit: |
true |
BIOS:
Firmware Maker and Version |
See General Notes Section |
BIOS:
Non-Standard Settings |
See General Notes Section |
| Test Suite: |
true
(May not apply to all OS Revisions. Please refer to 'General Notes') |
| General Notes: |
This blade server is certified on Solaris 10 9/10
CPU: dual 6-core Intel Xeon CPU X5680 3.3 GHz
ServerRAID MR5014 SAS/SATA controller in a RAID 5 configuration
Bios/Firmware Maker and Version:
UEFI: D6E148BUS-1.08- 06/25/2010 IMM YUOO73M
Chipset: Intel 5520
Certified with the following option cards:
IBM 49Y4250 Emulex 10 GB Virtual Fabric Adapter (Network controller)
IBM 46C7526 Virtual Media Key Internal USB
The network driver is supplied by the OS
Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net
is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port
-----------------------------------------------------------------------------------
This blade server is certified on Solaris 10 10/09
CPU: dual 6-core Intel Xeon CPU X5680 3.3 GHz
Bios/Firmware Maker and Version:
D6E148BUS-1.08 - 06/25/2010, IMM YUOO57H
Chipset: Intel 5520
Certified with the following option cards:
- ServeRAID MR5015 SAS/SATA Controller in a RAID 5 configuration
- Qlogic 8Gb FC Dual-Port HBA (42D0512)
The network driver is supplied by the OS
Non-standard BIOS Setting:
There is no support for UEFI in Solaris. Booting/Installing over the net
is accomplished through the legacy interface.
To configure an interface for legacy support:
Select Setup as the system is booting -> Select System Settings ->
Select Network -> Select PXE Configuration -> Select Port
|
| Submitter Company: |
Oracle Americ, Inc. |
| Last Updated: |
2010-08-05 | |
위 조건을 만족해야지 설치가 됩니다.
