My Retain Tip/X Series

ServeRAID M5015 SAS/SATA Controller Firmware 최신패치

엔지니어-FIXER 2011. 1. 27. 09:04


M5015의 경우 모두 크리티컬 오류가 있으므로
반드시 최신으로 패치를 해야합니다.
아래가 가장 최신입니다.

2010-01-19일 현재.

http://www-933.ibm.com/support/fixcentral/systemx/quickorder?parent=ibm/Systemx3650M3&product=ibm/systemx/7945&&platform=All&function=fixId&fixids=ibm_fw_sraidmr_5015-12.0.1-0097_windows_32-64,ibm_fw_sraidmr_5014-12.0.1-0097_windows_32-64&includeRequisites=1&downloadMethod=http&source=fc

위 링크에서 받으실수 있습니다

Version 12.0.1-0097 - Citical
-------------------
Fixes:
- Addresses an issue where data becomes inaccessible when drive is
   secured after data has been written
.
Version 12.0.1-0096 - Citical
-------------------
Fixes:
- Fixed an issue where the BBU may not be seen on POST.
- Fixed an issue where the firmware doesn't follow the spinupdelay
   and maxtargetspinup values set in NVDATA causing spin up of all
   the drives a at the same time.
- Fixed a very intermittent problem where the RAID key (M5000)
   authentication may not occur on boot leaving users without key
   options.
- Addressed a very rare issue with the expander devices where the
   firmware megamon could occur if the sgpio configuration cable has
   errors.

Version 12.0.1-0090 - critical
-------------------
Fixes:
- Fixed an issue where the controller properties such as Rebuild, CC,
   and BGI are not changing when the up and down arrow keys are used.
- Fixed an issue on x3950 M3 servers that can cause a system to hang at
   reboot

Version 12.0.1-0084 - Non-critical
-------------------
Enhancment:
- Support added for the ServeRAID M5000 Series Advanced Feature Key.

   Note: All Logical Drives must previously have encryption enabled
   before data is written on to the SED drives.  Please read Retain TIP
   H123152 for more details.

Version 12.0.1-0064
-------------------
- Initial release


5014와 5015같이 올려놓습니다.
윈도우용입니다.