My Retain Tip/X Series

UEFI hang 증상시 임시 복원방법

엔지니어-FIXER 2012. 2. 17. 17:36

For a system hung in the "UEFI PLATFORM INITIALIZATION" state, follow these steps:

  1. Boot to "backup UEFI" mode. This is done by moving jumper (J29 - UEFI) on the system board to the backup position (move Jumper 29 from pins 1 - 2 to pins 2 - 3).
    This allows the system to complete POST, and power up properly in most cases.
  2. Flash the UEFI to the latest version.
  3. Move the jumper back to "Primary UEFI" by moving Jumper 29 from pins 2 - 3 back to pins 1 - 2.

If the system fails to complete POST when booting from backup UEFI mode, or after returning to Primary UEFI mode after flashing UEFI in backup mode, contact IBM support. Do not replace the system board.


위와같이 복원방법이 있으나
100% 복원은 되는지 확인은 되지 않았음
J29는 어디있는거지? 보드에서 월리를 찾아야함
저작자표시 비영리 변경금지 (새창열림)