My Retain Tip/X Series
X3400 M3 디스크 추가시 파워변경해야함! 주의!
엔지니어-FIXER
2011. 7. 5. 18:07
디스크를 추가할때는
파워도 교체해야지 인식이 됩니다.
모든 모델이 아닌 한정 CTO모델이니 잘 보고 확인하세요
COG문서에 잘 나와있어요
고생하지 마시길.
http://www-03.ibm.com/systems/xbc/cog/x3400m3_7379/x3400m3_7379hdd.html
파워도 교체해야지 인식이 됩니다.
모든 모델이 아닌 한정 CTO모델이니 잘 보고 확인하세요
COG문서에 잘 나와있어요
고생하지 마시길.
http://www-03.ibm.com/systems/xbc/cog/x3400m3_7379/x3400m3_7379hdd.html
Notes:
- For 3.5" H/S HDD models, select "3.5" Hot Swap SAS/SATA 4 Pack HDD Upgrade Kit"
to expand 3.5" HDD bays from 4 to 8(offered in CTO only).
Please note that the selection of 3.5" HDD Upgrade kit will require SBB 69Y0952/FC7645 "920W Redundant Pwr Base", slim type optical drive instead of standard half height optical drive, and no tape drives supported. - For any 2.5" model supporting 16 HDDs(Offered as CTO models only),
SBB 69Y0952/FC7645 "920W Redundant Pwr Base"and "2.5"
Hot Swap SAS/SATA 8 Pack HDD
Upgrade Kit (expander included)" are the prerequisite. - UltraSlim optical devices are only required and supported on 8 x 3.5-inch configuration models. 4 x 3.5-inch and all 2.5-inch configuration models only supports the low cost half-high optical drives.