My Retain Tip/SWITCH

brocade san switch power off

엔지니어-FIXER 2020. 1. 19. 17:30

brocade san switch 는 파워 종료할 때 반드시 아래 명령어를 입력해야합니다

 

그냥끄면 하드웨어에 damage 를 입게 되겠죠

 

해당 명령어는 아래와 같습니다

 

 

  1. Connect to the switch and log in as admin.
  2. Enter the sysShutdown command.At the prompt, type y.
  3. switch:admin> sysshutdown - This command will shutdown the operating systems on your switch.You are required to power-cycle the switch in order to restore operation.Are you sure you want to shutdown the switch [y/n]?y.