BLOG main image
분류 전체보기 (781)
LENOVO (19)
HP (3)
DELL (7)
IBM (32)
My Retain Tip (697)
자료실 (0)
Firmware (5)
기타서버관련소식 (5)
IBM Server Picture (3)
STUDY (2)
설정세팅 (0)
Visitors up to today!
Today hit, Yesterday hit
daisy rss
tistory 티스토리 가입하기!
2017. 2. 15. 15:09
Notice!!
IBM
본 블로그의 모든내용은 ibm.com에 있는 내용이며 본 블로그의 내용은 증빙내용으로는 활용 불가능합니다
주의! 모든 방문자는 공지를 반드시 읽어본 후 글을 읽으시기 바랍니다.:*필독공지*

딴지 거실분들은 절대 읽지 마시고 100% 정확한 정보가 있는 ibm.com 에서 확인하시기 바랍니다.

http://www-01.ibm.com/support/docview.wss?uid=ssg1S7000303&aid=1

 

 

Verifying the configuration
To activate SDDDSM, you need to restart your Windows Server 2008, Windows
Server 2012, or Windows Server 2016 system after it is installed.
Attention: Ensure that SDDDSM is installed and activated before you add new
paths to a device. Otherwise, the Windows Server 2008, Windows Server 2012, or
Windows Server 2016 server could cause data corruption on that device.
Before adding any new hardware, review the configuration information for the
adapters and devices currently on your Windows Server 2008, Windows Server
2012, or Windows Server 2016 server. Complete the following steps to display
information about the adapters and devices:
1. You must log on as an administrator user.
2. Open the DOS prompt window.
v On a Windows Server 2008: Click Start → Program → Subsystem Device
Driver DSM → Subsystem Device Driver DSM.
v On a Windows Server 2012: Click Start Screen → Apps → Subsystem Device
Driver DSM.
v On a Windows Server 2016: Click Start → Subsystem Device Driver DSM →
Subsystem Device Driver DSM.
On a Windows Server 2012 or Windows Server 2016 Server Core CLI: Go to
%PROGRAMFILES% \IBM\SDDDSM.
3. Enter datapath query adapter and press Enter. The output includes information
about all the installed adapters. In the following example, the output shows
that one HBA is installed:
Active Adapters : 1
Adpt# Name Interface State Mode Select Errors Paths Active
0 Scsi Port6 Bus0 FC NORMAL ACTIVE 1099 1 112 112
4. Enter datapath query device and press Enter. In the following example, the
output shows that three devices are attached to the SCSI path:

About
IBM 최신서버에 관련된 경험과 지식을 공유하는 블로그이며 블로그에 처음오신분은 *필독공지*를 꼭 먼저 읽어보시기 바랍니다.