2012. 2. 17. 17:36
For a system hung in the "UEFI PLATFORM INITIALIZATION" state, follow these steps:
- Boot to "backup UEFI" mode. This is done by moving jumper (J29 - UEFI) on the system board to the backup position (move Jumper 29 from pins 1 - 2 to pins 2 - 3).
This allows the system to complete POST, and power up properly in most cases. - Flash the UEFI to the latest version.
- Move the jumper back to "Primary UEFI" by moving Jumper 29 from pins 2 - 3 back to pins 1 - 2.
If the system fails to complete POST when booting from backup UEFI mode, or after returning to Primary UEFI mode after flashing UEFI in backup mode, contact IBM support. Do not replace the system board.
위와같이 복원방법이 있으나
100% 복원은 되는지 확인은 되지 않았음
J29는 어디있는거지? 보드에서 월리를 찾아야함
'My Retain Tip > X Series' 카테고리의 다른 글
| X3250 M4 Firmware update 방법 (0) | 2012.02.23 |
|---|---|
| 네트워크 포트 흔들림으로 블루스크린 발생 NMI (0) | 2012.02.20 |
| KVM 사용키 인터페이스 시작은 CTRL or Alt or Shift (0) | 2012.02.13 |
| ServeRAID-MR 매니져 메뉴얼. (0) | 2012.02.09 |
| Uncorrectable memory errors generate false DIMM over-temperature errors 메시지발생 (0) | 2012.02.09 |