X3400 M3 디스크 추가시 파워변경해야함! 주의!

디스크를 추가할때는
파워도 교체해야지 인식이 됩니다.

모든 모델이 아닌 한정 CTO모델이니 잘 보고 확인하세요

COG문서에 잘 나와있어요
고생하지 마시길.
http://www-03.ibm.com/systems/xbc/cog/x3400m3_7379/x3400m3_7379hdd.html

Notes:

1. For 3.5" H/S HDD models, select "3.5" Hot Swap SAS/SATA 4 Pack HDD Upgrade Kit"
   to expand 3.5" HDD bays from 4 to 8(offered in CTO only).
   Please note that the selection of 3.5" HDD Upgrade kit will require SBB 69Y0952/FC7645 "920W Redundant Pwr Base", slim type optical drive instead of standard half height optical drive, and no tape drives supported.
2. For any 2.5" model supporting 16 HDDs(Offered as CTO models only),
   SBB 69Y0952/FC7645 "920W Redundant Pwr Base"and "2.5"
   Hot Swap SAS/SATA 8 Pack HDD
   Upgrade Kit (expander included)" are the prerequisite.
3. UltraSlim optical devices are only required and supported on 8 x 3.5-inch configuration models. 4 x 3.5-inch and all 2.5-inch configuration models only supports the low cost half-high optical drives.