2011. 1. 18. 19:09
Error Code 1601
An Advanced System Management flash update is needed.
Action: Download and install the latest xSeries 330/IntelliStation R Pro Advanced System
Management Firmware Update Utility program.
Error Code 162
A change in device configuration occurred. This error occurs under one or more of the following
conditions:
• A new device has been installed.
• A device has been moved to a different location or cable connection.
• A device has been removed or disconnected from a cable.
• A device is failing and is no longer recognized by the server as being installed.
• An external device is not turned on.
• An invalid checksum is detected in the battery-backed memory.
Action: Verify that all external devices are turned on. You must turn on external devices before
turning on the server.
If you did not add, remove, or change the location of a device, a device is probably failing.
Running the diagnostic program might isolate the failing device.
If you cannot isolate and correct the problem, call for service.
기본적으로는 최소 구성으로 부팅을 먼저 해본후에
바이오스에서 디폴트 세팅을 누른후 저장하고
재부팅 해보시고
그래도 안된다고 하면 펌웨어 업데이트까지 해보시기 바랍니다.
항상 문제가 있을땐 최소 구성으로 부팅을 꼭 해보세요!
resolving_1801-1802_errors_.pdf'My Retain Tip > X Series' 카테고리의 다른 글
| 하드디스크 8PACK 추가하는 방법 (0) | 2011.01.21 |
|---|---|
| 하드디스크에 표기된 FDE 는 무엇일까? (0) | 2011.01.20 |
| 두개의 MAC ADDRESS 를 탐지할때 IBM서버 BMC (0) | 2011.01.17 |
| IBM 서버 M2 모델 이상의 IMM 사용자 설명서 (2) | 2011.01.16 |
| 서버 연결시 네트워크 충돌이 계속 발생할 경우 (0) | 2011.01.15 |