2012. 5. 8. 09:54
잘 부팅되던 서버에 스토리지만 연결했을뿐인데 부팅이 안된다면
부팅순서가 문제가 있는거겠죠
http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5081613
해결방법입니다
위 링크를 참고하여 해결하세요
- Power on or restart the system and press F1 when prompted to enter Setup.
- Select System Settings and press Enter.
- Select Devices and I/O Ports and press Enter.
- Select Enable/Disable Legacy Option ROMs and press Enter.
- Under Enable/Disable Legacy Option ROMs select the slot number in which the HBA is installed and press Enter.
- Select Disabled and press Enter.
- Under Enable/Disable UEFI Option ROMs select the slot number in which the HBA is installed and press Enter.
- Select Disabled and press Enter.
- Press Esc 3 times to return to the System Configuration main menu, select Save Settings and press Enter.
- Select Boot Manager and press Enter.
- Select Add Boot Option and press Enter.
- Select Legacy Only and press Enter.
- Press Esc to return to Boot Manager.
- Select Change Boot Order and press Enter.
- Select the existing Boot Order and press Enter.
- Select Legacy Only and press the + key to promote it to a position above the local device which contains the operating system . Typically, this would be above Hard Disk 0. Press Enter.
- Select Commit Changes and press Enter.
- Press Esc to return to Boot Manager.
- Select Reset System and press Enter.
'My Retain Tip > Storage DS' 카테고리의 다른 글
| storage manager 방화벽 포트 오픈 2463 TCP UDP (0) | 2013.01.29 |
|---|---|
| IBM Storage 스토리지 피쳐키 발급 활성화 방법안내 (0) | 2012.05.10 |
| 스토리지 펌웨어 업데이트 순서 ESM,DISK,CTRL (2) | 2012.04.10 |
| 스토리지에 이용되는 멀티패스 드라이버들 (0) | 2012.02.29 |
| vxAbsTicks 스토리지 uptime(사용시간) 확인 방법 (0) | 2012.02.28 |