FOD DSA 입력시 폴더 이름

3.2.1 Install from USB memory key
In this section, we continue the process of using Preboot DSA to install an FoD activation key
that you previously downloaded and placed on a USB memory key. This is useful if you do not
have any network connectivity and have already download the FoD keys you want to apply
onto a USB memory key.
Before you continue, ensure that the FoD keys are located in the following subfolder of the
USB key:
/fodkeys/<FoD UID>/
For example, key file ibm_fod_8003_7160KQ5N05V_anyos_noarch.key should be in folder:
/fodkeys/7160KQ5N05V/
If the keys are not located in this directory, the error shown in Figure 3-16 will display.
Figure 3-16 Files missing from USB memory key
The process to install the FoD keys is as follows (continuing on from step 9 on page 39):
1. If you select Install activation key from removable media, the available removable
media is detected first. Click Next to proceed. See Figure 3-17.
Figure 3-17 Removable media selection
Tip: The folder names are not case sensitive; however, with older versions of Preboot
DSA, the path was case sensitive (for example, “FodKeys”) Also note that the file
extension must be .key (lower case) and not .KEY (upper case).

 

 

/FoDKeys/<FoD UID>/<keyfile.key>

 

반드시 대소문자 구별 UID는 MT SN 임

 

http://www.redbooks.ibm.com/redpapers/pdfs/redp4895.pdf