RADI M5014 M5015 firmware 업데이트 주의사항

펌웨어 이슈가 많은 RAID CARD 들

펌웨어 올리고 내릴떈 주의해야합니다

 

기본이 항상 최신을 유지하는거지만

특별한 문제가 없다면 그대로 쓰는게 좋습니다

 

RAID 펌웨어업데이트시 백업은 필수!

 

M5000 시리즈의 펌웨어 readme 파일입니다

 

- When upgrading from firmware version 12.7.0-0020 or below, a
   one-time firmware update to version 12.12.0-0085 is required
   before going to 12.12.0-0111 or higher (Retain Tip H206469). 
         - Rollback to previous firmware has only been verified for the
   following level(s): 12.12.0-0133. All other levels
           have not been verified.
         - Roll back to 12.7.0.xxxx or earlier will cause the controller to
           stop functioning.

 

주의해야합니다

 

 

 

ERROR: Update failed for controller 0!

ERROR: Failed to flash controller 0!

 

이런 오류가 나온다면

펌웨어가 너무 낮은상태에서 바로 최신으로 올려서 그럽니다

 

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5091457

 

여기를 참고하고 다시 시도하세요

 

 

 

 

그리고 사용중에

 

| IPMI:(03/28/2012 13:06:35) Disk or disk bay 1 (Drive Slot (Bay) - Drive 1): Assertion: Drive Fault
| IPMI:(03/28/2012 13:04:29) Disk or disk bay 1 (Drive Slot (Bay) - Drive 1): Assertion: Rebuild/Remap in progress
| IPMI:(03/28/2012 13:03:07) Disk or disk bay 1 (Drive Slot (Bay) - Drive 1): Deassertion: Drive Presence
| IPMI:(03/28/2012 12:44:28) Disk or disk bay 0 (Drive Slot (Bay) - Drive 0): Assertion: In Critical Array
| IPMI:(03/28/2012 12:44:28) Disk or disk bay 2 (Drive Slot (Bay) - Drive 2): Assertion: In Critical Array
| IPMI:(03/28/2012 12:44:28) Disk or disk bay 4 (Drive Slot (Bay) - Drive 4): Assertion: In Critical Array
| IPMI:(03/28/2012 12:44:26) Disk or disk bay 5 (Drive Slot (Bay) - Drive 5): Assertion: In Critical Array
| IPMI:(03/28/2012 12:44:26) Disk or disk bay 1 (Drive Slot (Bay) - Drive 1): Assertion: Drive Fault
| IPMI:(03/28/2012 12:44:26) Disk or disk bay 3 (Drive Slot (Bay) - Drive 3): Assertion: In Critical Array

 

이런종류의 메시지가 나온다면

펌웨어 업데이트 하면됩니다

 

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5090537

 

위링크를 참고하세요