USB하나를 뒷쪽 컨트롤러에 연결하세요
그러면 컨트롤러 LED 중에 빨간색이 깜빡입니다. 약 10초 후 꺼집니다.
그리고 USB를 빼고 노트북에 연결후 루트에 있는 파일을 열면 됩니다 파일 하나만 생성됨 satask
버전에 따라 txt혹은 html로 저장됩니다
ip와 기본 정보를 확인가능합니다.
USB는 꼭 FAT32로 하시기 바랍니다
About this task
When a USB flash drive is plugged into a node canister, the node canister code searches for a text file named satask.txt in the root directory. If the code finds the file, it attempts to run a command that is specified in the file. When the command completes, a file called satask_result.html is written to the root directory of the USB flash drive. If this file does not exist, it is created. If it exists, the data is inserted at the start of the file. The file contains the details and results of the command that was run and the status and the configuration information from the node canister. The status and configuration information matches the detail that is shown on the service assistant home page panels.
The satask.txt file can be created on any workstation by using a text editor. If a Microsoft Windows workstation is being used, the initialization tool can be used to create the commands that are most often used.
The fault light-emitting diode (LED) on the node canister flashes when the USB service action is being performed. When the fault LED stops flashing, it is safe to remove the USB flash drive.
Results
The USB flash drive can then be plugged into a workstation and the satask_result.html file viewed in a web browser.
To protect from accidentally running the same command again, the satask.txt file is deleted after it has been read.
If no satask.txt file is found on the USB flash drive, the result file is still created, if necessary, and the status and configuration data is written to it.
'My Retain Tip > V7000' 카테고리의 다른 글
| Flashcopy feature V7000 license 정책 (0) | 2017.03.08 |
|---|---|
| Performance data csv값 항목 설명 (0) | 2016.09.10 |
| V7000 수동 디스크 교체 방법 (0) | 2016.02.27 |
| V7000과 DS4700 시리즈의 다른점 (0) | 2016.02.20 |
| v5000 v7000 Ghost 디스크 복구방법 (0) | 2015.12.04 |