BLOG main image
분류 전체보기 (781)
LENOVO (19)
HP (3)
DELL (7)
IBM (32)
My Retain Tip (697)
자료실 (0)
Firmware (5)
기타서버관련소식 (5)
IBM Server Picture (3)
STUDY (2)
설정세팅 (0)
Visitors up to today!
Today hit, Yesterday hit
daisy rss
tistory 티스토리 가입하기!
2011. 6. 25. 11:43
Notice!!
IBM
본 블로그의 모든내용은 ibm.com에 있는 내용이며 본 블로그의 내용은 증빙내용으로는 활용 불가능합니다
주의! 모든 방문자는 공지를 반드시 읽어본 후 글을 읽으시기 바랍니다.:*필독공지*

딴지 거실분들은 절대 읽지 마시고 100% 정확한 정보가 있는 ibm.com 에서 확인하시기 바랍니다.
스토리지 펌웨어 권장 레벨입니다.

DS3950/4000/5000 Recommended Firmware Levels


위 스토리지는 아래의 권장 펌웨어에 맞게 하면 좋습니다

https://www-304.ibm.com/support/docview.wss?uid=ssg1S1003714

Technote (troubleshooting)
 
Problem(Abstract)
This page contains recommended firmware levels for the following products: DS3950, DS4200, DS4700, DS4800, DS5020, DS5100, and DS5300.
 
Resolving the problem
DS3950 guidance for firmware (FW) selection:
  • In general, the recommended controller FW is 07.70.38.00. The recommended enclosure FW is ESM FW 98D0 for EXP395 and EXP810 expansion enclosure.
  • The 7.77.18.00 firmware version maybe required for new features as described in the 7.77.18.00 Readme file. Before installing 07.77.18.00, please review SSIC for supported interoperability.
  • The minimum level for any DS3950 is 07.36.17.00 and ESM FW 98D0 for EXP395 and EXP810 expansion enclosures.
  • Storage Manager v10.77.x5.16 is recommended for all FW levels.

DS3950 support on the IBM Support Portal

DS4200 guidance for firmware (FW) selection:
  • In general, the recommended controller FW is 07.60.40.00. The recommended enclosure firmware is ESM FW 98D0 for EXP420 expansion enclosures.
  • The minimum controller FW for any DS4200 is 07.60.40.00 or 06.60.34.00 with ESM FW 98D0 (EXP420).
  • Storage Manager 10.70.x5.25 is recommended for all FW levels.
DS4200 support on the IBM Support Portal

DS4700 guidance for firmware (FW) selection:
  • In general, the recommended controller FW is 07.60.40.00. The recommended enclosure firmwares are ESM FW 98D0 for EXP810 and 9682 for EXP710 expansion enclosures.
  • The minimum controller FW for any DS4700 is 07.60.40.00 or 06.60.34.00 with ESM FW 98D0 (EXP810), 9681 (EXP710) and 9565 (EXP100).
  • Storage Manager 10.70.x5.25 is recommended for all FW levels.
DS4700 support on the IBM Support Portal

DS4800 guidance for firmware (FW) selection:
  • In general, the recommended controller FW is 07.60.40.00. The recommended enclosure firmwares are ESM FW 98D0 for EXP810 and 9682 for EXP710 expansion enclosures.
  • The minimum controller FW for any DS4800 is 07.36.17.00 or 06.60.34.00 with ESM FW 98D0 (EXP810), 9681 (EXP710) and 9565 (EXP100).
  • Storage Manager 10.70.x5.25 is recommended for all FW levels.
DS4800 support on the IBM Support Portal

DS5020 guidance for firmware (FW) selection:
  • In general, the recommended controller FW is 07.70.38.00. The recommended enclosure FW is ESM FW 98D0 for EXP520 and EXP810.
  • Existing DS5020 systems requiring the SSD FC #5590 and #5591 must be upgraded to 07.70.23.00 or later. New DS5020 systems are shipping with FW 07.77.18.00.
  • The 7.77.18.00 firmware version maybe required for new features as described in the 7.77.18.00 Readme file. Before installing 07.77.18.00, please review SSIC for supported interoperability.
  • The minimum level for any DS5020 is 07.36.17.00 and ESM FW 98D0 for EXP520 and EXP810.
  • Storage Manager v10.77.x5.16 is recommended for all FW levels.

DS5020 support on the IBM Support Portal

DS5100 guidance on firmware (FW) selection:
  • In general, the recommended controller FW is 07.70.23.00. The recommended enclosure FW is FW 98D0 for EXP5000/EXP810 and 9921 for EXP5060.
  • At installation, new systems should be upgraded to 07.60.40.00 or later.
  • The 7.77.18.00 firmware version maybe required for new features as described in the 7.77.18.00 Readme file. Before installing 07.77.18.00, please review SSIC for supported interoperability.
  • The minimum FW for any DS5300 is 07.36.17.00, 98D0 for EXP5000/EXP810, and 9921 for the EXP5060.
  • Storage Manager 10.77.x5.16 is recommended for all FW levels.
DS5100 support on the IBM Support Portal

DS5300 guidance on firmware (FW) selection:
  • In general, the recommended controller FW is 07.70.23.00. The recommended enclosure FW is FW 98D0 for EXP5000/EXP810 and 9921 for EXP5060.
  • At installation, new systems should be upgraded to 07.60.40.00 or later.
  • The 7.77.18.00 firmware version maybe required for new features as described in the 7.77.18.00 Readme file. Before installing 07.77.18.00, please review SSIC for supported interoperability.
  • The minimum FW for any DS5300 is 07.36.17.00, 98D0 for EXP5000/EXP810, and 9921 for the EXP5060.
  • Storage Manager 10.77.x5.16 is recommended for all FW levels.
DS5300 support on the IBM Support Portal



안정적인 버전으로 하시는게 좋겠죠?

About
IBM 최신서버에 관련된 경험과 지식을 공유하는 블로그이며 블로그에 처음오신분은 *필독공지*를 꼭 먼저 읽어보시기 바랍니다.